Our Services Page

• Interior Painting
• Exterior Painting
• Garage and Driveway Coatings

1. Setup
• Rooms and areas to be painted are scheduled with the customer.
• Large furniture is moved into the center of the room.
• Furniture is covered with plastic.
• Floors are covered with drop cloths and heavy duty plastic for optimum protection.
2. Prep
• Walls are scuff-sanded.
• Holes and cracks in walls are filled.
• Gaps in trim are caulked.
• Stains, such as water marks, are sealed.
• Washing is done where required.
3. Painting
• Repaired areas are primed.
• Paint is applied with a brush, roller or sprayer depending on the surface.
• Ceiling and walls are painted to proper coverage and finish color.
• Clean cut lines between trim & walls.
• Only premium quality paints are used.
4. Clean up
• Furniture is moved back to original positions.
• Floors and carpets are thoroughly swept.
• All garbage is removed.
• Touch-up paint is labeled and left with the customer.
5. Inspection
• Before the crew packs up their equipment, a "wet walk-around" is done to ensure all contracted areas are painted properly.
• Final touch-ups are noted on a 'punch list' & are completed before the crew leaves.

1. Power Washing
• Environmentally-friendly detergent or bleach is used to remove dirt & mildew as required.
• Delicate areas are hand-washed.
• Loose paint chips are cleaned up.
• House is given time to dry.
• Driveways & decks cleaned upon request.
2. Scraping, Priming & Minor Maintenance
• All loose paint is removed, all bare areas are primed.
• Glossy areas are scuff-sanded.
• Feather-sanding and stripping done on request.
• Areas around doors and windows are caulked, window panes receive new putty where necessary.
• Wood, masonry and stucco repairs available upon request or when specified on the contract.
3. Painting
• Full finish coat is applied to proper coverage & finish.
• All non-painted surfaces are covered to protect against splatter & drips.
• Paint is applied with a brush, roller, or sprayer depending on the surface.
• Second coat is available upon request or when specified on the contract.
• Only premium quality paints are used.
4. Clean up
• Performed daily and upon completion of the job.
• All garbage is removed.
• Plant beds cleaned and paint chips removed.
• Touch-up paint is labeled & left with the customer.
• Outdoor fixtures & furniture replaced.
5. Inspection
• Before the crew packs up their equipment, a "wet walk-around" is done to ensure all contracted areas are painted properly.
• Final touch-ups are noted on a 'punch list' & are completed before the crew leaves.
• The final approval is given by the customer.